Packs/Racks/Baskets

The Jandd Reflector Mount allows riders to attach a reflector to a rack.

A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.

• Vinyl coated hooks • 9 mm diameter • Black

Expedition Rack stay extensions. Sizing Chart for Expeditions: - Women's Small: 365mm - Women's Medium: 305mm - Small: 365mm - Medium: 365mm - Large: 305mm - X-Large: 250mm Sizing Chart for Globe Carmel 26" and Expedition: - Women's Small: 365mm - Women's Medium: 305mm - Small: 365mm - Medium: 305mm - Large: 250mm - X-Large: 250mm

Replacement buttons and straps for the Remora Aero Storage. - Rubber straps and buttons to secure the Remora Top Tube Storage container.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

Replacement waterproof liners for Banjo Brothers bags. To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide. - Works only with models 01150, 01150R and 01150W - Welded seams - Not suitable as a stand-alone bag

The Bungee net is 12?x12? with 4 heavy duty hooks. Made with very durable shock cord material.

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag

Designed to be a simple and stylish storage solution, this pouch is made from upcycled bicycle inner tubes so your stuff stays protected and dry. It's a great wallet alternative, cell phone case, spare change container, or tool/flat repair kit. Materials: - Upcycled Bicycle Inner Tubes - Nylon Teeth with Zinc Zipper - Dimensions: 3 H x 5.5 W x 0.75 D in./63.5 x 139.7 x 19.5 mm - Capacity: 9 cu. in./147 mL - Weight: 1.1 oz./31 g Features: - Water resistant exterior - Zippered closure - Built in Colorado - Made in the USA - Limited Lifetime Warranty

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

Extend the life of your Dummy bags with this replaceable wear patch.

Tubus strut clamp set for attaching and adjusting front stays on Cargo and Logo rear racks. - Aluminum block with stainless steel hardware - Fits 8mm diameter stays

- Hardware included - Fits all Sunlite Gold-Tec racks - Cut to length

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Designed to be simple and stylish storage solutions, these pouches are made from upcycled truck inner tubes so your stuff stays protected and dry. The large pouch protects your sunglasses, pens, or small hand tools. Materials: - Upcycled Truck Inner Tubes - Nylon Teeth with Zinc Zipper - Dimensions: 5.5 H x 7 W x 0.75 D in./139.7 x 177.8 x 19.5 mm - Capacity: 21 cu. in./340 mL - Weight: 2.5 oz./71 g Features: - Water resistant exterior - Zippered closure - Built in Colorado - Made in the USA - Limited Lifetime Warranty

Tire lever. Multi-tool. Bottle opener. Pointer finger (you can re-attach that later). Beer money. Our tool bag has abundant room for all the essentials. And if you're worried about your stuff getting wet, don't be. 420d matte PVC-coated nylon and Velcro'll keep it dry. Isn't science great? - 7.5 inches wide - 6.5 inches tall

Surly Front Rack Hardware

These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs